Most Gas Central heating systems contain deposits of sludge and corrosion which causes problems poor circulation and boiler noise problems, as well as inefficient operation which will raise your gas bills at today’s rates the cost to your energy bills of up to 25%. Power flushing removes these harmful deposits and the problems that they cause and increasing the efficiency of the system. If not dealt with the boiler and system might well need replacing, which could cost thousands of ponds.
Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.
Power flush equipment, is normally set up outside, connects to your central heating via a radiator and cleans the whole system without having to take off all the radiators.
Power flush cleanser is added to the system water and starts to agitate the rust. The heating is turned on and radiator surfaces checked for cold spots. By flushing water through individual radiators and vibrating cold spots the sludge is rapidly dislodged. The sludge is pumped from radiators and is collected in a magnet filter and trapped there.
All radiators and pipe work are flushed and magna cleansed until water samples are clean.
A build cert approved corrosion inhibitor is added to the clean water, radiators are re balanced as required.
Our professional and friendly engineers will thoroughly powerflush your central heating system guaranteeing you a warmer home, improved hot water and lower gas bills by around 25%.